4" contact wheel Belt Grinder The auxiliary components and attachments

The auxiliary components and attachments on the Gibson 72 maintain this over-engineered philosophy and premium build quality

-40x40x400mm

the 6-in-1 rotating platen provides:

greatly increased clearance on the left side of the platen and 2 different length slack belts both with extended clearance over the stock platen

Simply loosen the locking handle on the tooling arm and rotate the platen to change between the 215mm steel platen

4" contact wheel Belt Grinder The auxiliary components and attachments*Disclaimer before ordering this wheel for a Shop Master 2x72" grinder, please measure your tooling arm. The 4" Contact Wheel requires a 400mm long tooling arm (all newer Shop Masters are supplied with these as standard). Older Shop Master 2x72" grinders were supplied with 300mm tooling arms which will not work with this wheel. You can order a 400mm tooling arm HERE, or use a small wheel arm if you have one. Alternatively, the 4" can also be swapped