Guide Sleeve - Without Cleat - With Lip - 3.9 mm x 5 mm Drills 035” Hex Driver is used

035” Hex Driver is used to tighten and loosen the Stylus Set Screw against one of the four flat sides of the Guide Post

Offset from Lower Shaft: 2

Handheld Drill Handle

0 mm Depth Stop Crestal Sinus Elevation Drill Set (Counterclockwise)

Sleeve is used to make a Guide for full edentulous implant cases

Guide Sleeve - Without Cleat - With Lip - 3.9 mm x 5 mm Drills 035” Hex Driver is usedThe 3. 9 mm Guide Sleeve Without Cleat With Lip is for use with printed guides only. Sleeves are designed with a lip which secures the stereolithographic printed Guide Sleeve so it will not slip through the printed guide hole. Dimensions: ID 3. 9 mm x OD 5 mm x 5. 07 mm L OD 6. 2 mm lip x . 05 mm lip thickness Pair with: 3. 9 mm Depth Stop Drill Set