Straight Guide Sleeve - Without Cleat - 2.0 mm x 6.0 mm Guide Sleeve Inserts It is recommended (not always

It is recommended (not always necessary) to use the Flattening Drill prior to the Pilot Drill if the crest is sharp or slanted and start the dental implant osteotomy site preparation with the Pilot Drill

then cured to form the Guide

9 mm x OD 5 mm x 9 mm L  / with cleat

Thin-Walled Diagnostic Guide Sleeve - With Cleat - 2

The Guide Sleeve Inserts should be firmly pressed down for the press fit design to keep inserts from spinning while drilling the osteotomy

Straight Guide Sleeve - Without Cleat - 2.0 mm x 6.0 mm Guide Sleeve Inserts It is recommended (not alwaysThe Straight Cut thin walled Guide Sleeve is used for anterior areas where access to the implant area is unlimited. Sleeve is used to make a Guide for full edentulous implant cases. Dimensions: ID 2. 0 mm x OD 2. 4 mm x 6 mm L