EBC Racing 12-17 Subaru WRX STI 2.5T Front Titanium Shim Cooling>Expansion Tanks With 7 common configurations stored

With 7 common configurations stored in memory from the factory

this innovate spacer spares you the cost and time required to order a custom length driveshaft

The roto-molded housing is made out of black cross-linked polyethylene and mounts directly into the factory location on the fender well to capture the coolest air available from the factory intake tract

you can tailor the response curve of your Turbosmart controller to suit any aftermarket or motorsport ECU control strategy

and is then ready to be paired with your OEM clutch kit or one of our FX100-FX500 single disc clutch kits or twin disc options

EBC Racing 12-17 Subaru WRX STI 2.5T Front Titanium Shim Cooling>Expansion Tanks With 7 common configurations storedShims must be flat and sit without any gapping on the rear of the brake pad. If your pad set is supplied with any other shims such as the rubberised shims on most stock pads, these Must be removed before fitting titanium shims to avoid a pad over thickness situation. Simply prize the old shims off to break the adhesive seal with a blunt edge screwdriver or similar, and once removed lightly, sand the rear of the pad to remove any excess glue or surface