Flex Fit Glass Clamp Kit for 21.5mm Glass 90° Tube End For 48.3mm x 2mm Tube The connector has a 48mm

The connector has a 48mm by 2mm wall size

Flexi-Fit set can adjust any glass panel individually while positioning it up to 34mm in relation to the vertical axis

simply apply our origin glue around the seal of the end cap and knock it into place

In each clamp kit you will receive enough ‘clamps’ for positioning every 250mm on the glass and a rubber seal/ gasket to sit on top of clamps

It is typically used on staircases

Flex Fit Glass Clamp Kit for 21.5mm Glass 90° Tube End For 48.3mm x 2mm Tube The connector has a 48mmFlex Fit Channel is compatible with glass thicknesses between 12mm 21. 5mm. Flex Fit Channel is compatible with glass thicknesses between 12mm 21. 5mm. Your clamp kit is tailored to your glass thickness selection. Flexi Fit set can adjust any glass panel individually while positioning it up to 34mm in relation to the vertical axis. It can be handled exclusively from the balcony side, this applies to the entire installation, making it much safer and