Adafruit LSM6DSO32 6-DoF Accelerometer and Gyroscope (STEMMA QT / Qwiic) _RPI_PI400 The screw terminals are marked

The screw terminals are marked + and - but it won't damage your thermocouple or the breakout itself if you connect your thermocouple's wires up the wrong way round

CircuitPython and Raspberry Pi

SPI bus with two chip selects

Thickness of Strip: 4mm / 0

You will need to purchase one separately here (or "borrow" the one from your kettle) to use it

Adafruit LSM6DSO32 6-DoF Accelerometer and Gyroscope (STEMMA QT / Qwiic) _RPI_PI400 The screw terminals are markedBehold, the ST LSM6DSO32: The latest in a long line of quality Accelerometer+Gyroscope 6 DOF IMUs from ST. This IMU is like a big sister to the LSM6DSOX; it has the same pinout and firmware but the accelerometer component can go up to 32g instead of the normal 16g maximum. This IMU sensor has 6 degrees of freedom 3 degrees each of linear acceleration and angular velocity at varying rates within a respectable range. For the accelerometer: 4 8 16 32 g