HIPS Support 3DXMAX [3DXTech 1.75mm] 1Kg Type = Water Soluble Platform temperature: 70-110 °C

Platform temperature: 70-110 °C

Dimafix spray makes 3D printing easier by providing great grip between plastic and glass with an adhesion property which activates when heated bed temperature is 85ºC

000 points/s

ULTEM™ 1010 resin is an amorphous

a perfect interlayer adhesion and can be printed directly on a heated glass plate without any adhesives or tapes to be used

HIPS Support 3DXMAX [3DXTech 1.75mm] 1Kg Type = Water Soluble Platform temperature: 70-110 °C3DXMax HIPS Support Material Manufactured in the USA from 100% virgin HIPS (High Impact Polystyrene) resin. Filament diameter specs: 1. 75mm + 0. 05mm Recommended Print Conditions: Extruder: 220 235C [printing with higher temps will make a stronger tougher support, which may be more difficult to remove] Bed Temp: 100 110C Bed Prep: Kapton Tape, ABS Acetone Slurry on clean glass Dissolves easily in d Limonene orange solvent