Rifeng Multilayer Unequal Tee Reduced End extension Replacement Hose

Replacement Hose

The Prisma bottle trap is designed to be installed with sinks and basins where the waste fittings are exposed

*This valve is designed to fit both 32mm and 40mm pipe

Brass Compression metric fittings should not be used for below ground applications

Suitable for ground floor wet floor areas where 4"/110mm drainage pipework has been installed to the finished floor level and no waterproofing membrane is required

Rifeng Multilayer Unequal Tee Reduced End extension Replacement HoseDESCRIPTION: RIFENG Universal "H", U and TH Profile Crimp Fittings feature 2 EPDM O Rings on each fitting insert which provide an interference fit to the inner wall of the pipe and which when combined with a pressed stainless steel outer pressure sleeve provide a water tight seal. They can be assembled and pressed within a matter of seconds. Each stainless steel pressure sleeve features inspection windows which provide for installer joint reassurance.