Cometic Toyota 3E/4E/5E 1.3L/1.5L 75mm Bore .051 inch MLS Head Gasket FWD w/ No Extra Oil Holes Suspension>Lift Springs Manufactured from low-deflection 88-durometer polyurethane

Manufactured from low-deflection 88-durometer polyurethane

Horn when used with a Max Effort Tune

Paintable Mesh

BMRs lower control arm bushings replace the soft factory bushings increasing steering and handling consistency by reducing bushing deflection

slip fit collectors

Cometic Toyota 3E/4E/5E 1.3L/1.5L 75mm Bore .051 inch MLS Head Gasket FWD w/ No Extra Oil Holes Suspension>Lift Springs Manufactured from low-deflection 88-durometer polyurethaneThe Cometic MLS gasket is comprised of three to five layers of stainless steel. Cometic uses stainless steel for increased strength, its ability to rebound and resist corrosion. The outer layers of the gasket are embossed and coated on both sides with a Viton rubber material designed to meet the demands of a variety of harsh sealing environments, load conditions and surface finishes. The Viton coating is heat resistant to 250C or 482F.