Driveshaft Shop 1997-2000 C5 6-Speed Manual and Automatic 3″ Aluminum Driveshaft (Torque Tube) 10mm bolts Relocation Brackets The shaft will come with

The shaft will come with our signature billet plates for each end so you don't have to go in to the rear taking a chance on upsetting the crush collar (see below for billet plate VS changing to a Pinion yoke below) Our shaft comes with a 300m stub system mounted into a billet aluminum plate to ensure not only strength but lighter weight than the normal way of doing this type of end (look closely at the CV end its not all steel) The shaft only weighs 27 lbs and come with special 12

On Truck Adjustable Heim Joints

We found the bars and internals are closer to the C7 corvette or maybe the CTS-v axles in the fact that not only the internal splines are much larger but the CV parts themselves are

- Designed for street performance

Note: Drilling new frame holes may be required on some applications/swaps

Driveshaft Shop 1997-2000 C5 6-Speed Manual and Automatic 3″ Aluminum Driveshaft (Torque Tube) 10mm bolts Relocation Brackets The shaft will come withProduct Description: Our new torque tube driveshaft is made from 3 x. 125 wall 6061 T6 aluminum and uses our own custom machined ends. This will ensure that the shaft will not distort or break like the factory units. The factory shaft is made from a smaller tube (there are 2 different types) and will flex and actually bend during hard acceleration, causing the rubber drives to wear out prematurely. Available for C5 and C6 applications, and can also be